HORCHAMP PIPEHDPE · PVC · PPR PIPING SYSTEMS

+86 134 0555 2599 Request a Quote

Home / Products

PRODUCTS

Five piping systems, one supplier

HDPE, steel-wire reinforced HDPE, PVC, PPR and jointing equipment. Choose the system, then the pressure class — every family lists its diameter range and the standard it is tested against.

HDPE Pipe And Fittings

7 product familiesPE100 · ISO 4427

HDPE water pipeDN20–1600 · PN6–PN25 HDPE gas pipeDN20–630 · ISO 4437 HDPE dredging pipeDN200–1000 · flanged HDPE co-extrusion pipeUV white / black HDPE pipe fittingsbutt & electrofusion HDPE drainage pipeSN4 / SN8 corrugated HDPE mining pipeSDR9–SDR17 heavy wall

HDPE Water Pipe

PE100 SDR41–SDR7.4

PE100 solid-wall pressure pipe for potable mains and transmission lines. Coil up to DN250, straight 6/12 m above.

View details

HDPE Gas Pipe

ISO 4437 DN20–630

Yellow PE100 gas distribution pipe, permanent marking, electrofusion jointing, ISO 4437 / EN 1555.

View details

HDPE Dredging Pipe

ISO 4427 DN200–1000

Flanged dredge sections with wear allowance, plus bolt-on floaters for floating discharge lines.

View details

HDPE Drainage Pipe

SN4 / SN8 DN110–1200

Double-wall corrugated and solid-wall drainage with SN4 / SN8 ring stiffness, perforated option.

View details

HDPE Pipe Fittings

Butt fusion DN63–800

Butt fusion elbow, tee, reducer, end cap, stub end and backing flange, DN63–800.

View details

Electrofusion Fittings

DN20–630 traceable

Coupler, elbow, tee, reducer and saddle with barcode traceability for site repair and tie-ins.

View details

Co-EXSpecification on request

HDPE Co-Extrusion Pipe

UV stable DN20–630

White UV-stabilised outer layer over black core for exposed ground runs and high-temperature service.

View details

HDPE Mining Pipe

SDR9–SDR17 abrasion

Heavy-wall slurry, tailings and dewatering lines, SDR9–SDR17, flanged transitions available.

View details

Steel Wire Mesh Reinforced HDPE Pipe

SRTP / SRPEComposite

SRTPSpecification on request

SRTP Pipe — Steel Mesh Reinforced

SRTP PN1.0–2.5

HDPE inner and outer layers with a high-strength steel wire mesh core: higher pressure at lower wall thickness than plain PE.

View details

SRPESpecification on request

SRPE Pipe — Steel Skeleton

SRPE DN50–800

Steel skeleton reinforced polyethylene composite for trunk mains, high pressure and high temperature service.

View details

PVC Pipe And Fittings

6 product familiesUPVC · CPVC · PVC-O

UPVC water pipeDN20–630 · PN10/16 PVC pipe fittingssolvent weld PVC sewer pipeDN110–630 CPVC pipeDN15–300 · hot water PVC-O pipeDN90–500 PVC-M pipeDN90–500

UPVCSpecification on request

UPVC Water Pipe

DN20–630 PN10/16

Unplasticised PVC pressure pipe for cold water distribution and irrigation mains, solvent-weld jointing.

View details

PVC-USpecification on request

PVC Sewer Pipe

DN110–630 gravity

PVC-U drainage and sewer pipe with rubber-ring joint, for gravity networks and building drainage.

View details

CPVCSpecification on request

CPVC Pipe

≤95 °C DN15–300

Chlorinated PVC for hot water and industrial service up to 95 °C, DN15–300.

View details

FittingsSpecification on request

PVC Pipe Fittings

solvent weld DN20–400

Solvent-weld and threaded fittings: elbow, tee, reducer, coupling, union, valve sockets.

View details

PVC-OSpecification on request

PVC-O Pipe

oriented DN90–500

Molecularly oriented PVC: thinner wall for the same pressure, higher surge resistance.

View details

PVC-MSpecification on request

PVC-M Pipe

modified DN90–500

Impact-modified PVC for buried mains where toughness matters more than pressure rating.

View details

PPR Pipe And Fittings

2 product familiesHot water

PPR water pipeDN20–160 · PN20 PPR pipe fittingssocket / threaded

PP-RSpecification on request

PPR Water Pipe

PN20 DN20–160

PP-R hot and cold water pipe, PN20, socket fusion jointing, for building service and district hot water.

View details

PP-RSpecification on request

PPR Pipe Fittings

socket fusion DN20–160

Socket, elbow, tee, reducer, union and threaded transition, matched to the pipe family.

View details

Welding Machine

Jointing equipmentButt & electrofusion

Butt Fusion Welding Machine

63–315 mm site use

Manual and hydraulic butt fusion machines for PE pipe 63–315 mm, with heating plate, planing tool and parameter chart.

View details

EF unitSpecification on request

Electrofusion Control Unit

EF barcode

Power unit for electrofusion couplers and saddles, barcode scanning, logging of weld parameters.

View details

ToolsSpecification on request

Jointing Tools & Accessories

tools spares

Pipe clamps, rollers, scraper tools, heating plate thermometers and butt-fusion consumables.

View details

Diameter and pressure ranges above are the standard production ranges we quote into. A specific family (for example PVC-O above DN400, or SRTP at 2.5 MPa) depends on the mill we source that order from — ask for the datasheet of the exact size you need and we send it with the quotation.

SDR and pressure rating explained — full wall thickness table →

NEXT STEP

Send the size and the destination port

We reply with price, lead time and a loading plan. Pipe, fittings and machines can be consolidated in one container.

Request a quotation